Adding New Extra Battery :D

Support requests related to hardware

Adding New Extra Battery :D

Postby milad » Sat Dec 30, 2006 11:46 am

hi


my player have 230 mAh Battery that enough for 6 hours playing but it is to short i decide to add new big battery for it i bought one Nokia N70 battery that have big capacity (800 mAh) and use 3rd wire to attach to player's board

NOW my player play about 30 hours without any problem and my charger chrage it fully

DREAMLY

bye
Last edited by milad on Mon Apr 30, 2007 10:00 am, edited 1 time in total.
Model:Apacer AU822
Mainboard:K2TJ1061006305
Chip:2085H
Battery:230 mAh 3.7v
Flash Chip:K9K8G08U0M
Firmware:ACTS16D_37 3.5.38
Zhaleh Theme: http://forum.s1mp3.org/viewtopic.php?t=6725
User avatar
milad
Moderator
Moderator
 
Posts: 858
Joined: Mon Oct 30, 2006 9:42 am
Location: Iran-Sanandaj

Postby TheBard » Sat Dec 30, 2006 7:34 pm

Do you have pictures and/or a wiring diagram to show how you installed the battery?
User avatar
TheBard
 
Posts: 2
Joined: Fri Dec 29, 2006 4:32 am
Location: USA

Postby milad » Sun Dec 31, 2006 1:25 pm

hi

SOLDER 3rd wire to mobile battery (mobile battery have 3 pin you most use left and right dont use middle because this pin have low voltage) the pin pole marked by manufacture like + -

then open your player and solder 3rd wire to coorect wire of main battery (dont remove main battery)

that's all

bye
Model:Apacer AU822
Mainboard:K2TJ1061006305
Chip:2085H
Battery:230 mAh 3.7v
Flash Chip:K9K8G08U0M
Firmware:ACTS16D_37 3.5.38
Zhaleh Theme: http://forum.s1mp3.org/viewtopic.php?t=6725
User avatar
milad
Moderator
Moderator
 
Posts: 858
Joined: Mon Oct 30, 2006 9:42 am
Location: Iran-Sanandaj

Postby milad » Sun Dec 31, 2006 2:18 pm

hi

i make a diagram see below :

Image

excuse me it's so ugly :D

bye
Model:Apacer AU822
Mainboard:K2TJ1061006305
Chip:2085H
Battery:230 mAh 3.7v
Flash Chip:K9K8G08U0M
Firmware:ACTS16D_37 3.5.38
Zhaleh Theme: http://forum.s1mp3.org/viewtopic.php?t=6725
User avatar
milad
Moderator
Moderator
 
Posts: 858
Joined: Mon Oct 30, 2006 9:42 am
Location: Iran-Sanandaj

Postby TheBard » Sun Dec 31, 2006 6:25 pm

Very good.

Thank you!
User avatar
TheBard
 
Posts: 2
Joined: Fri Dec 29, 2006 4:32 am
Location: USA

Postby Schopf » Sun Dec 31, 2006 11:16 pm

Good topic! Thanks!
User avatar
Schopf
Moderator
Moderator
 
Posts: 381
Joined: Sun Aug 27, 2006 1:06 am
Location: Brazil

Postby helloworld » Sat Jan 06, 2007 7:16 pm

Hi, all.

I'm new in the forum. This is my first post.

milad, your post is really interesting. I've a couple of question
for you. I recently bought a iPod Nano chinese clone and its
battery life is very short (5-6 hours). I didn't yet open it and I would
like to know, please:

1) what kind of player do you have?
2) does the new battery fit in the player?
(You can reassemble it after putting the new battery?)
3) how long it takek to recharge now?
4) could you post a picture of your modded player?

Thanks for attention.
helloworld
 
Posts: 6
Joined: Sat Jan 06, 2007 7:04 pm

Postby milad » Sat Jan 06, 2007 7:38 pm

hi helloworld

1) you can use this instruction for all player that have 3.7v Li-ION battery

2)no, because new battery is big you most paste it to back of your player

3)noe it take about 4-5 hours for full charging

4)yes i wnat add one new battery to it after it i post some picture

my player height is now about 1 milimeter (battery 3 mil and player 7 mil)

bye
Model:Apacer AU822
Mainboard:K2TJ1061006305
Chip:2085H
Battery:230 mAh 3.7v
Flash Chip:K9K8G08U0M
Firmware:ACTS16D_37 3.5.38
Zhaleh Theme: http://forum.s1mp3.org/viewtopic.php?t=6725
User avatar
milad
Moderator
Moderator
 
Posts: 858
Joined: Mon Oct 30, 2006 9:42 am
Location: Iran-Sanandaj

Postby helloworld » Sat Jan 06, 2007 7:41 pm

Hi, milad.

Thanks for fast answer. I can't wait for pictures!

Bye
helloworld
 
Posts: 6
Joined: Sat Jan 06, 2007 7:04 pm

Postby milad » Sun Jan 07, 2007 1:15 pm

hi

i take picure see below :

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image


i hope this picture help you

BYE :D
Model:Apacer AU822
Mainboard:K2TJ1061006305
Chip:2085H
Battery:230 mAh 3.7v
Flash Chip:K9K8G08U0M
Firmware:ACTS16D_37 3.5.38
Zhaleh Theme: http://forum.s1mp3.org/viewtopic.php?t=6725
User avatar
milad
Moderator
Moderator
 
Posts: 858
Joined: Mon Oct 30, 2006 9:42 am
Location: Iran-Sanandaj

Postby helloworld » Sun Jan 07, 2007 3:57 pm

Thanks a lot, milad!!!

You did a really great job. Thanks for sharing it with us. I'm
sure it will be useful for many people!

Bye
helloworld
 
Posts: 6
Joined: Sat Jan 06, 2007 7:04 pm

Postby negeltu » Mon Jan 08, 2007 6:17 am

So you wired in parallel adding their capacities together and keeping the same voltage output. Let me ask... is there enough space in the case to add another 240mAH battery on top of the previous and wire in parallel..thus doubling the capacity? That way there would be no reason to piggyback the other battery externally.
negeltu
 
Posts: 14
Joined: Fri Jan 05, 2007 9:41 am

Postby helloworld » Mon Jan 08, 2007 11:35 am

Hi, all.

Another question is: the replacement battery pack for the real
Apple iPod like this:

http://cgi.ebay.it/I-Replacement-Li-ion ... dZViewItem

could be compatible with our nano clones? Do someone know
the three dimensions of a real Apple iPod battery pack?

Thanks for attention.
helloworld
 
Posts: 6
Joined: Sat Jan 06, 2007 7:04 pm

Postby negeltu » Mon Jan 08, 2007 12:48 pm

I was wondering the same thing about the Ipod battery. I'm still searching the forums and looking online for info.
negeltu
 
Posts: 14
Joined: Fri Jan 05, 2007 9:41 am

Postby helloworld » Mon Jan 08, 2007 12:57 pm

Please, let us know if you get some useful information.
Thanks.
helloworld
 
Posts: 6
Joined: Sat Jan 06, 2007 7:04 pm

Next

Return to Hardware support

Who is online

Users browsing this forum: No registered users and 1 guest



cron