MP-693C-SL MAIN V1.3 2005.12.14 Nano clone recovered!

Post here if you managed to recover your player, or solve your problem, and tell us how!

Postby keller » Tue May 23, 2006 10:54 pm

YES! YOU ARE MY MAN!
This guy just helped me so much to recover my player (we've got the same model). It started when I (Patrick) gave him my Firmware firmware dump 3.5.37 which works fine on his player. I just wanted to try his old firmware on mine player, just to take a look and we both thougt there couldn't be any problem, because we have the same type of player. So for short, I put the 3.5.35 fw on my player and it worked, but when I tried to reflash my player, it didn't work and we tested many firmwares in almost 1 day... Finally I wanted to give up, but just a few minutes ago, FLASHGET send me an email with the link to this great firmware:
http://www.magnex.it/prodotti/mp3/dvs6000.htm
I tried it, like he recommended me to do and what can I say? IT'S ALIVE MUAHAHA!!! Amazing, this little mashine was almost dead and after Flashing it with that fw, I just had to Format it... Ok, the format-progress finished unsuccessfully, but it seems to me, that tha Player works great, just as nothing happened ;)

THX ALEXEJ!
keller
 
Posts: 19
Joined: Sat May 20, 2006 8:26 pm

worked well for board: MP-732CV1-SL chip:AMP2085

Postby david777 » Wed May 24, 2006 2:42 pm

thanx
david777
 
Posts: 3
Joined: Tue May 23, 2006 2:31 pm

Postby snipe783 » Wed May 24, 2006 2:58 pm

i have MP4 player nano clone 2GB :
MP-693C-SL MAIN V1.3 2005/12/14
ATJ2085W
SAMSUNG 510
K9W8G08U1M

BUT this firmware: http://www.alexejw.net/firmware/3.5.37%20dump.zip
don't work with my player
error:"invalid firmware"
snipe783
 
Posts: 11
Joined: Tue May 23, 2006 6:26 pm

Postby keller » Wed May 24, 2006 4:31 pm

snipe783 wrote:i have MP4 player nano clone 2GB :
MP-693C-SL MAIN V1.3 2005/12/14
ATJ2085W
SAMSUNG 510
K9W8G08U1M

BUT this firmware: http://www.alexejw.net/firmware/3.5.37%20dump.zip
don't work with my player
error:"invalid firmware"


Read FLASHGET's whole post! He mentions THREE different firmwares...
keller
 
Posts: 19
Joined: Sat May 20, 2006 8:26 pm

Thanksssssssssssss!

Postby kelvin » Thu May 25, 2006 3:16 am

Thankssssssss Flash get!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Thanksssssssssssss David 777
kelvin
 
Posts: 2
Joined: Wed May 17, 2006 4:26 am

MP-693C-SL MAIN V1.3 2005.12.14

Postby starbunyip » Thu May 25, 2006 9:04 am

Hi - your success story is giving me hope, however I am very new to this, so please treat my questions as though I am a three year old raised in a forest.

I have the same nano clone as you. Using the dead recovery guide I opened the player and have found the same information that you have.

I followed your excellent instructions but am now a little stuck and could use some guidence.

I got this far:
1. My device recognised by windows
2. My firmware updated by the update tool - used the same firmware you did
3. Windows recognises it as a flash drive
4. I have downloaded 3.5.35

5. I have no idea what the term 'flash your dump' means

6. I tried the update tool - got an error message
7. It has found my data on the disk, but some of it is corrupted. Do you have format hints.

How do you exactly 'flash your dump'

Thanks for your time in posting your excellent success story
Starbunyip
starbunyip
 
Posts: 1
Joined: Thu May 25, 2006 8:49 am

Postby keller » Tue May 30, 2006 3:18 pm

alfabe wrote:but i don't search by artist


Could you ever search for an artist or a track? I don't think so, I'm very sure about that...
keller
 
Posts: 19
Joined: Sat May 20, 2006 8:26 pm

Postby skaterfou » Thu Jun 01, 2006 12:45 pm

Hello

I bought a MP4 (like Ipod 1.5 screen) 1 Go

ATJ2085W
MP-693c-SL MAIN v1.3 2005.12.14
Samsung 610 K9K8G08U0M
QQ 1GB

I have doing what you sugest .... windows recognize my MP4 .... but i have still this Fu****** Blue screen or black screen (when I puit the Firmware CDT sd4284-h_v2.0_7 = it's the version 3.042

I don't know what happened ... please help me.

Thanks
skaterfou
 
Posts: 4
Joined: Sat May 27, 2006 4:30 pm

Postby MARBAT » Sat Jun 03, 2006 1:21 pm

I'M IN THE SAME CONDITION: BLUE/BLACK SCREEN!!

HELP US PLEEEEASE... :(
MARBAT
 
Posts: 6
Joined: Fri May 19, 2006 8:55 am

AFTER SHORTING IT FOUND NEW USB DEVICE BU?

Postby muksforu » Mon Jun 05, 2006 9:51 am

After shorting I/o 5-7 it found new usb device but cant able to install drivers it say unknown device....

my s1pm3 detail is...

MP-693C-SL MAIN V1.3 2005.12.14

how to solve it dead by upgrading before upgrade it restarting...

Image

Image

pls

hep

:P :P
muksforu
 
Posts: 2
Joined: Mon Jun 05, 2006 9:46 am

Postby muksforu » Mon Jun 05, 2006 9:59 am

when i attach it normally it detect as H: drive and when i try to format it it say write protected drive...


how to solve tht
muksforu
 
Posts: 2
Joined: Mon Jun 05, 2006 9:46 am

Postby ian_hawdon » Mon Jun 05, 2006 3:37 pm

Short the pins again, tell it to look for the drivers in the MP3 utilities folder (usuall in the Program Files folder of your C drive)
Who is General Error and why is he reading my hard drive? :D

If any of my posts have helped you, or if you're interested, click this link and sign up to help me get a free iPhone: http://apple.real-incentives.com/40461
User avatar
ian_hawdon
Site Admin
Site Admin
 
Posts: 978
Joined: Wed Aug 24, 2005 7:00 pm
Location: Newcastle Upon-Tyne, England

Postby nakun » Tue Jun 06, 2006 10:15 pm

Hello I have a model CK2694 MAIN V1.3 2006-04-17 It comes with firmware [/b]PMA300_006 2005/11/04 RYJ-5.5.35 2005/12/16.
I tried to update to 3.5.35 and It didn´t work, I revived it with 3.5.37v2.1b FM for recovery.fw but any dumps works with my MP4, thanks to good I have a backup of my dump and It lives again.

All the dumps od this topic din´t work with me and the http://www.scrub50187.com/MP4.html neither.

Anyone can help me??? I want to update my MP4 to the newest version PLEASE!!!!!
nakun
 
Posts: 8
Joined: Tue Jun 06, 2006 10:06 pm

Postby chnapsy » Wed Jun 07, 2006 7:57 pm

Hi
My player is a MP-693C-SL V1.3 1Go (looks like an ipod nano)
I tried to change firmware because the original one sux ...
So i used the upgrade tool v3.06 wich was delivered with the player.
After the first flash, it was still reconized by windows but only display black.
I follow exaclty your a recovery plan an succeded to turn it in recovery mode and flash with this firmware : 3.5.37v2.1b 20FM for recovery.zip
Flash works but my player still display a black or dark blue screen ...
Does anybody have an idea ?
Thank you
chnapsy
 
Posts: 24
Joined: Wed Jun 07, 2006 7:06 pm

Postby nakun » Wed Jun 07, 2006 9:45 pm

After flashing with the recovery firmware yo need to flash with yout "dump.bin" backup get by the s1fwx_v26 before you flash your ipod nano, If you haven´t got any you can try the two dumps that are posted in this topic, if until this your ipod clonde don`t want to revive try the other dumps in the "firmware list page".
I have the same problem as you and I revive it with my dump backup.
KAMBARE!!!
nakun
 
Posts: 8
Joined: Tue Jun 06, 2006 10:06 pm

Next

Return to Success Stories

Who is online

Users browsing this forum: No registered users and 1 guest



cron