S1Clone problem

Topics related to the S1mp3.org project (webpage, politics, etc.)

Moderator: wladston

S1Clone problem

Postby Happy|Harry » Fri Aug 31, 2007 7:08 pm

hi every time i run s1clone on my working v9 player it starts reading the flash then stops with an error that says

"the semaphore timeout period has expired"?

what is the problem?

thanks in advance for any help
Happy|Harry
 
Posts: 6
Joined: Tue Nov 07, 2006 1:03 am

Re: S1Clone problem

Postby milad » Sat Sep 01, 2007 11:33 am

hi

it's a bug . s1 clone have many bug and can't work with all player

bye
Model:Apacer AU822
Mainboard:K2TJ1061006305
Chip:2085H
Battery:230 mAh 3.7v
Flash Chip:K9K8G08U0M
Firmware:ACTS16D_37 3.5.38
Zhaleh Theme: http://forum.s1mp3.org/viewtopic.php?t=6725
User avatar
milad
Moderator
Moderator
 
Posts: 858
Joined: Mon Oct 30, 2006 9:42 am
Location: Iran-Sanandaj

Re: S1Clone problem

Postby deepg » Tue Oct 02, 2007 9:48 am

Hi, I had this same problem. :D :D :D To fix this, Just use a very short USB cable. :D :D :D I was using a 1 meter cable, had lots of errors with S1Clone and also uploading songs to the player (many time outs, delayed write errors. etc). All is good, short - short - short cable. (about 10cm)

{edit} but alas the S1clone still does not write to device, (reading ok){/edit}
deepg
 
Posts: 1
Joined: Tue Oct 02, 2007 9:44 am

Re: S1Clone problem

Postby BARMAN2005 » Tue Oct 09, 2007 3:17 pm

Short cable you should find in your MP3 suite. ;)
PS: Wow, new version of s1clone 1.2, check this out! http://s1mp3.de/
User avatar
BARMAN2005
Ugly Duckling :D poster
Ugly Duckling :D poster
 
Posts: 416
Joined: Wed Mar 14, 2007 1:30 pm
Location: Poland

Re: S1Clone problem

Postby Chintamir » Thu Dec 13, 2007 11:03 am

s1clone 1.1 and s1clone 1.2 never works on ATJ2091, ATJ2093 chips. Even not working at ACUxxxx chips. :?: :!: :cry: :(
Thanks to you all
Chintamir
Beginner
 
Posts: 39
Joined: Sat Jul 01, 2006 2:58 am

Re: S1Clone problem

Postby americo2 » Sat Apr 26, 2008 12:58 am

open device: \\.\libusb0-001--0x10d6-0xff61
device is in recovery state!
v9-device detected!
giveio version:3.0
open flash at cs-line 1 ...
flash chip: 2584DCAD "HYNIX/SAMSUNG 512MB (SBF)"(preotected=0)
open file: c:\program files\s1clone\driver\acu7503.img
start formatting flash...
error:failed to format block 0x000000000
error:failed to format block 0x000000001
error:failed to format block 0x000000002
error:failed to format block 0x000000003
error:failed to format block 0x000000004
error:failed to format block 0x000000005
error:failed to format block 0x000000006
error:failed to format block 0x000000007
error:failed to format block 0x00000003F
error:failed to format block 0x0000002CB
" " " " " "
error:failed to format block 0x000003D9D
start writing flash....
error:failed to write page 0x000002C27
error:failed to write page 0x000002DE3
" " " " " "
warning: differences in page 0x0000089D6
warning: differences in page 0x0000089D7
error:failed to write page 0x00000a590

Same player,same hardware,same board,same display,same chip!

Please what is wrong?
americo2
 
Posts: 3
Joined: Wed Mar 26, 2008 9:40 am

Re: S1Clone problem

Postby balrock » Wed Nov 19, 2008 3:15 pm

americo2 wrote:open device: \\.\libusb0-001--0x10d6-0xff61
device is in recovery state!
v9-device detected!
giveio version:3.0
open flash at cs-line 1 ...
flash chip: 2584DCAD "HYNIX/SAMSUNG 512MB (SBF)"(preotected=0)
open file: c:\program files\s1clone\driver\acu7503.img
start formatting flash...
error:failed to format block 0x000000000
error:failed to format block 0x000000001
error:failed to format block 0x000000002
error:failed to format block 0x000000003
error:failed to format block 0x000000004
error:failed to format block 0x000000005
error:failed to format block 0x000000006
error:failed to format block 0x000000007
error:failed to format block 0x00000003F
error:failed to format block 0x0000002CB
" " " " " "
error:failed to format block 0x000003D9D
start writing flash....
error:failed to write page 0x000002C27
error:failed to write page 0x000002DE3
" " " " " "
warning: differences in page 0x0000089D6
warning: differences in page 0x0000089D7
error:failed to write page 0x00000a590

Same player,same hardware,same board,same display,same chip!

Please what is wrong?


A mí también me pasa lo mismo, estoy intentando recuperar un mp4 a traves de otro igual que este y cuando hago el upgrade aparecen estos mensajes mientras realiza el proceso.

warning: differences in page 0x0000089D6
warning: differences in page 0x0000089D7

-----------------------

I have the same problem, happens exactly equal, I am trying to recover mp4 through another one just as this and when I do upgrade the firmware, it appear these messages while the process realise.

warning: differences in page 0x0000089D6
warning: differences in page 0x0000089D7
balrock
 
Posts: 1
Joined: Sat Jan 13, 2007 8:55 pm


Return to S1mp3.org project

Who is online

Users browsing this forum: No registered users and 1 guest



cron