Dead S1 Mp3 Player - ATJ2091N - Wilson Co Ltd 9.0.50 - help!

[BARMAN2005]

I need 9.0.50 fw for MP3, not MP4! Please...

[crotofago]

Hello, Barman.

My MP3 player is dead for the moment, and it also needs a firmware 9.0.50.
I could see, searching as far I could trip through the whole internet, that each mp3 player has its own version for the 9.0.50 firmware.
To work exactly like it used to work, you must download a 9.0.50 version that was exactly the same of the one that you used.
I mean, for example, if you had a foston mp3 player of 1 gb 9.0.50, a S1 mp3 player of 5 gb won't work out fine using this one.
It happens because the file has some informations that tells how the firmware makes the mp3 work using the hardware that is installed.
Somethings that I think you should know:
Most players only work right if you format in FAT, not in FAT 32, so the one that told you that was telling you the most probable choice;
If you install a firmware 9.0.43 you can't install a 9.0.50 if you don't format it again. If your mp3 is a 9.0.50 so I think it can't work fully because you replaced it with a lower version.
I maybe writing some ******** here, but I hope I can give you a little clue to deal with this lot of information we are supposed to read to make our mp3 players ressurect.

[crotofago]

I saw what you wrote about the contrast change.
When it shows that "it is not an Integer value" it means that the choice you did is not an Integer number, for example 1 or 2 or 3 or 4, etc.
You chosen 3.6, so it is not an integer number, but a floating number.
The firmware you put can't recognize floating numbers, so you can only choose the number 1 or 2 or 3 or 4 or 5, etc.
Is your player showing that it is full, yet?

[BARMAN2005]

...Is your player showing that it is full, yet?...

How can I check it?

[crotofago]

Connect the mp3 to the pc and click on its properties.
Or the pc can't recognize it?

[BARMAN2005]

This

...You chosen 3.6, so it is not an integer number, but a floating number...

I choose 16 and I see the same information...! I choose many different numbers but I see again the same information... :/

[crotofago]

I don't know a single word in polish, but it seems that a driver is missing for the pc to recognize the mp3.
Seek for a forum that tells something about formated mp3 players, about what to do to make pc recognizeit after formating it.
But before, seek for a forum that tells something about formating mp3, because I still think that you might have formated it in FAT, not FAT 32.
Keep on writing what's happening.
Let's make this sh*t work.

[BARMAN2005]

Posts from 2 page of my topic:

OK! I format my player in FAT. Now my player is like pendrive...

...Oh, no! I had 2gb but now I have only 946MB! I can't put more files on my mp3, but there is free space! Before when my mp3 work I use full space and all be ok...

...

I format again but in FAT32 and now my player has 2GB. ...

...Ok. Now I need only firmware...

I formated in FAT and I had 1/2 of all space of my mp3. I formated then again but in FAT32 and I have now all space - 2GB.

I don't understand you... What I should do? I have now pendrive 2GB. I only need firmware 9.0.50 for my player. Have you got it? You can use s1clone to extract it from mp3.

...Let's make this sh*t work...

I hope...

[crotofago]

Go to the top of this page and enter the link http://s1mp3.org . This site maybe written in polish too, as I could see the Poland banner in its main page.
Seek for a link called "dead recovery guide", in english or polish and there is written what you should do.
I don't have any backup of my bin file and I'm in the same situation you are, but I haven't formated my mp3, because I still believe in miracles and I think one day I can find a holy guy that has made the backup the way I needed.
Enter this link I told you to and do what they say. Open the player, intify the chip number, look for the right firmware that the chip needs blá, blá, blá...
Don't ever forget to write how things are going.
Ah... the picture you showed appeared on mine too. It shows that the mp3 player is full because for the pc the player is locked, like a cd-rom.
And the length of your mp3 is right. It shows only 1 mb to record something. It fits in one floppy disk.
Then you need to put the right firmware on it.

[BARMAN2005]

Do you read my topic?! Here is first page: viewtopic.php?p=21977#21977 (...)

I have copy of my original fw but this copy has bugs(I did it in s1fwx but wiRe made new program for v9 players[s1fwx can't extract v9 fw] - this new tool is s1clone - it can extract v9 fw and now I am waiting for copy of 9.0.50 fw for me).

I ask you: Do you have or do you know where I can find fw Wilson Co Ltd 9.0.50 2GB with no FM?

I only need firmware for my mp3... Only fw...

[crotofago]

I don't know where you can find it.
Yours doesn't have radio and it gets harder to find.
It looks like each player is a different person that needs a rare blood type.
Each player is one in a million.
Good luck for you! (Wish me good luck too!)

[BARMAN2005]

You are so funny! I wish you good luck but...

viewtopic.php?p=23763#23763
viewtopic.php?p=23755#23755

Read this pages. We have big problem! s1clone do very big file size of copy extracted fw. :/

--edit--

Already we have solution!

[djdjango]

what is the ID of your SAMSUNG FLASh?

[BARMAN2005]

Information about Mp3:
S1 Mp3 Player 2GB, no FM

Chip:
ATJ2091N
F807708 58H

Memory flash:
Samsung 704
K9LAG08U0M
PCB0
FEL620PBC

Other information(Board number?):
YSB16124V1.03
2005-09-22 SZR

If you have some 9.0.50 fw please give me it. Thanks!

[G_R_E_E_N]

At me a similar problem, I have MP4 a player, but it(he) is killed, at inclusion on the screen a sand-glass.

At connection to PC it(he) sees it(him), to establish the driver tries, but does not find the driver at whom is on WinXP USB 2.0??
Parameters of the chip the following:
The chip: ATJ2091N
flash: SAMSUNG 713 K9LAG08U0M

It is thankful in advance for the help, and many thanks for attention